ADT® Authorized Dealer Serving San Antonio & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your San Antonio Residence

Property owners must protect against a variety of risks like burglary, flooding, and fire. But what about a danger that can’t be perceived by human senses? Carbon monoxide creates an uncommon challenge because you might never realize it’s there. Even so, using CO detectors can easily safeguard yourself and your household. Explore more about this dangerous gas and where to place carbon monoxide detectors in your San Antonio property.

What Is Carbon Monoxide?

Known as the silent killer due to its lack of color, taste, or odor, carbon monoxide is a readily found gas caused by incomplete fuel combustion. Any fuel-utilizing appliance like an oven or fireplace can create carbon monoxide. Even though you usually won’t have problems, difficulties can crop up when an appliance is not frequently serviced or adequately vented. These mistakes could lead to a proliferation of this potentially deadly gas in your residence. Heating appliances and generators are commonly to blame for CO poisoning.

When exposed to lower levels of CO, you could suffer from fatigue, headaches, dizziness nausea, or vomiting. Extended exposure to higher concentrations could result in cardiorespiratory failure, coma, and death.

Suggestions On Where To Place San Antonio Carbon Monoxide Detectors

If you don’t have a carbon monoxide detector in your residence, buy one today. Preferably, you should install one on every floor, including basements. Browse these tips on where to place carbon monoxide detectors in San Antonio:

  • Put them on each level, especially in areas where you use fuel-burning appliances, like water heaters, furnaces, gas dryers, and fireplaces.
  • You should always install one within 10 feet of bedroom areas. If you only have one CO detector, this is where it should go.
  • Position them at least 10 to 20 feet from potential CO producing appliances.
  • Do not affix them directly above or next to fuel-utilizing appliances, as a small amount of carbon monoxide might be released when they turn on and prompt a false alarm.
  • Secure them to walls approximately five feet from the floor so they may test air where people are breathing it.
  • Avoid using them in dead-air areas and next to doors or windows.
  • Place one in spaces above garages.

Test your CO detectors routinely and maintain them according to manufacturer instructions. You will typically need to replace units in six years or less. You should also make certain any fuel-burning appliances are in in good working condition and have adequate ventilation.